systems_sensors_SENR_Combisensor Temperature/Relative Humidity

SEN-R Combisensor Temp/RH Adcon TR1
Extremely accurate and robust combi-sensor for air temperature and humidity

systems_sensors_RG1_Rain_Gauge Precipitation
RG1 Rain Gauge, 200cm², 0.2mm, unheated
Brand new design, fully made of aluminum: accurate, robust, with a long service life
systems_sensors_Adcon_BP1 Barometric Pressure
Adcon BP1 Barometric Pressure 500 - 1500mbar, 0.1-2.5V, 3m
Extremely accurate - yet extremely affordable. Swiss made precision in a wind gust proof case
systems_sensors_PR_Pyranometer Solar Radiation
PR Pyranometer SP-LITE incl . amplifier
Meteorology, Medicine, Agriculture, the energy industry - they all depend on solar radiation - which nobody measures more accurately than Kipp & Zonen
systems_sensors_EasyAG_SDI12 Soil Moisture & Temperature
EasyAG 50cm 5 sensors / SDI-12 sensors in 10/20/30/40/50 cm
With a length of 50cm and a diameter of only 32mm these sensors are extremely fast and easy to install. Featuring 5 sensors they are available with or without salinity option
systems_sensors_WIN_Windspeed_Direction Wind Speed & Direction
Windspeed and Direction 200km/h
Extremely compact and robust combi sensor, yet very accurate and maintenance free
systems_sensors_WET_Leaf_Wetness Leaf Wetness
WET Leaf Wetness Sensor incl. holder
A robust and reliable leaf wetness sensor is essential for a wide range of agronomical disease models
systems_sensors_Adcon_LEV1 Water Level
Adcon LEV1 Level sensor, rel., 0 - 10m, incl. 15m of cable
Digitally compensated level sensors suitable for a wide range of applications
systems_sensors_Adcon_PA1_Manometer Pipeline Pressure
Adcon PA-1 Manometer 0-10 bar M12 connector, 1/4" thread
This new probe offers a spectacular price-performance ratio and makes pressure monitoring affordable for any application
systems_sensors_GPS_Compass GPS with Digital Compass
A516 GPS Locator with Digital Compass
Variety of applications, mainly the remote observation of moving field equipment
Supply Voltage 4.5 ... 15 VDC
Current consumption < 1,5 mA typ.
Operating Temperature -40°C ... +60°C
-40°F ... +140°F
Operating Humidity 0 ... 100% rH
Material of radiation shield PC
Mounting material Aluminum tube, PC brackets,
pipe clamps of W4 stainless stelle
Material of sensor body Tecapet
Protection class IP65
Dimensions L x W x H 450 x 100 x 170mm
L x W x H 17.72 x 3.94 x 6.69 in.
Weight 600g / 1.3 lb.
Cable and Connector 3m cable with male 7-pin M9 Binder
Mounting mast mounting brackets for 40mm pole,
with 2 pipe clamps 32-50mm
Relative Humidity
Measuring Range 0 - 100%rH
Accuracy at +20°C
from 0 - 90% rH
from 90% - max. rH
+ 2% rH
+ 3% rH
Temperature dependence + 0.03% rH /°C
Long-term Stability <1% rH per year
Output Signal 0 ... 2.5 V
Sensor Element capacitance, with protective coating (HC01)
Measuring range -40°C ... +60°C
-40°F ... +140°F
Accuracy at +20°C + 0,2°C
Output signal 0 ... 2.5V DC
Sensor element pt1000 DIN A

Resolution in mm 0.2
Orifice in cm² 200
Measuring device Double Tipping buckets
Capacity/Minute @ Accuracy up to 1mm (0.4") @ + 2%
1 - 2 mm (0.4 ...0.8") @ + 5%
Output signal one pulse per tip
Reed switch potential free reed switch, fully sealed, made by Meder, Germany, >1 million operations
Weight 0.5 kg / 1.1 lb.
Material anodized aluminum
Cable PUR, shielded, 1m / 3.3ft
Connector 7-pin Binder M9 male
Operating temperature freezing point to +75°C (+167°F)
Heating not available

Pressure range (FS) 500 to 1500mbar
Sensing element: piezoresistive pressure element
Accuracy: 0.1% FS
Operating temperature: -40°C ... +100°C / -40°F ... +212°F
Compensated Temperature range: 0°C ... +80°C / 32°F ... +176°F
Supply Voltage: 3.5V ... 12V DC
Output Signal: 0.1V ... 2.5V
Material: Case: Polycarbonate
Sensor: Stainless Steel 316L (DIN 1.4435)
Dimensions L x B x H:
including mounting bracket, goretex vent
and gland nut
150 x 80 x 75mm / 5.9 x 3.15 x 2.95 in.
Weight: 330 grams (sensor only) / 0.73 lb.
Protection: IP67
Cable & Connector: 7-pin Binder jack with 2m cable

CMP-3 SP-Lite
Sensitivity 5-20µV/Wm² 100 µV/Wm²
Spectral Range 310 - 2800nm 400 - 1100nm
Max. Irradiance 2000 W/m² 2000 W/m²
T.C. of Sensitivity +/-5% (-10°C - 40°C) +/- 0.15% /°C
Operating Temperature -40°C - 80°C
-40°F - 176°F
-30°C - 70°C
-22°F - 158°F
Non-stability (change/year) +/-1% n.a.
(0-1000 W/m²)
+/- 2.5% n.a.
Tilt response
(at 1000 W/m²)
+/- 3% n.a.

Measuring range 0-100% Vol 0-100% Vol
Method HF Capacitance HF Capacitance
Salinity --- 0-17 dS/m
Accuracy +/- 0,06% Vol +/- 5% (Salinity)
Interface SDI-12 SDI-12
Lengths 50cm 50cm
Number of Sensors 5 5

Wind Speed
Measuring Range 0.7 – 55.6m/s (2.2 – 200km/h)
Linearity ± 0.3m/s & ± 2% rdg @ 20°C
Onset Speed 0.6m/s (2.2 km/h)
Operating Temperature -30°C to +65°C
Wind Direction
Measuring Range 0° - 360°
Measuring Device Potentiometer
Linearity ± 1%
Dead Angle 3° ± 1°
Switching Point North
Onset Speed 0.6m/s (2.2 km/h)
Connector 7 pin Binder jack (male)
Cable 2m

Measuring Range 0 - 9 Units
Measuring Principle Electrical Conductivity
Operating Temp. 0°C-+60°
Connector Binder 7-Pin M9 IP67
Output Signal 0 - 2,5V

Pressure Ranges 1, 3, 10 bar
Overpressure 3, 7, 20 bar
Type of reading relative, compensated against barometric pressure
Operating temperature -40°C ... +80°C
Pressure transmitter piezo resistive
Compensated Range 0°C ... +80°C
Accuracy (0-40°C) 0,1% FS
Resolution < 0,01% FS
Long Term Stability typ. Range < 2 bar: 1mbar
Range > 2 bar: 0,1% FS
Output Signal 0.1 ... 2.5V DC
Supply Voltage 3.2 ... 12V DC
Length 95mm / 3.74"
Diameter 22mm / 0.9"
Cable Polyethylene (PE), vented
Cable length 15m (others upon request)
Connector 7-pin M9 Binder jack (male)
IP Protection IP68 (Probe), IP67 (Connector)
Material in Contact with Media Stainless Steel 316L (DIN 1.4435) /
Viton / PE

Pressure ranges 10 and 30 bar
Overpressure 20 and 60 bar respectively
Operating temperature -40 °C to +80°C
Pressure Transmitter piezo resistive
Compensated T-Range 0°C to +50°C
Accuracy (0-50°C) typ. 1% FS max. 1.5% FS
Linearity typ. 0,25 % FS max. 0,5 % FS
Manometer thread G 1/4" (NPT adapters optional)
Output Signal 0.1 - 2.5V
Supply Voltage 3.5V - 12V DC
Length 49 mm (1.93")
Diameter 22mm (0.87")
Weight 30 gr.
Cable shielded PVC2
Cable Length 5 or 10m (please order separately)
Connector on probe
Connectors on cable
4-pin M12 male on probe
4-pin M12 female to
7-pin M9 Binder male
IP Protection IP67
Material in Contact with Media Stainless Steel 316L (DIN 1.4435) / Viton / PE

Dimensions 350 x 100 x 100 mm
Weight 500g
Protection Class IP-65
Power Supply 5.6 to 16V DC
Temperature Range Compass: -20°C ... +70°C
GPS: -40°C ... +75°C
Interface SDI-12
Resolution 0.01°
Magnetometer Specifications + 1100uT Measurement Range
0,015uT Resolution
Max Sample Rate 10 per second
GPS Locator
Receiver Type 32 Channel Acquisition
Positional Accuracy 1.3m (outdoor), 50% CEP
Sensitivity -161dBm Tracking
-161dBm Hot Acquisition
-145dBm Cold Acquisition
TTFF (Time To First Fix ) < 1sec @ -130dBm outdoors HOT
33sec typ. @ -130dBm COLD
Operational Limits: Max. velocity: 515m/s
Power Consumption: 60mA in acquisition phase