Sensors
Precipitation
RG1 Rain Gauge, 200cm², 0.2mm, unheated
Brand new design, fully made of aluminum: accurate, robust, with a long service life
Barometric Pressure
Adcon BP1 Barometric Pressure 500 - 1500mbar, 0.1-2.5V, 3m
Extremely accurate - yet extremely affordable. Swiss made precision in a wind gust proof case
Solar Radiation
PR Pyranometer SP-LITE incl . amplifier
Meteorology, Medicine, Agriculture, the energy industry - they all depend on solar radiation - which nobody measures more accurately than Kipp & Zonen
Soil Moisture & Temperature
EasyAG 50cm 5 sensors / SDI-12 sensors in 10/20/30/40/50 cm
With a length of 50cm and a diameter of only 32mm these sensors are extremely fast and easy to install. Featuring 5 sensors they are available with or without salinity option
Wind Speed & Direction
Windspeed and Direction 200km/h
Extremely compact and robust combi sensor, yet very accurate and maintenance free
Leaf Wetness
WET Leaf Wetness Sensor incl. holder
A robust and reliable leaf wetness sensor is essential for a wide range of agronomical disease models
Water Level
Adcon LEV1 Level sensor, rel., 0 - 10m, incl. 15m of cable
Digitally compensated level sensors suitable for a wide range of applications
Pipeline Pressure
Adcon PA-1 Manometer 0-10 bar M12 connector, 1/4" thread
This new probe offers a spectacular price-performance ratio and makes pressure monitoring affordable for any application
GPS with Digital Compass
A516 GPS Locator with Digital Compass
Variety of applications, mainly the remote observation of moving field equipment
Supply Voltage |
4.5 ... 15 VDC |
Current consumption |
< 1,5 mA typ. |
Operating Temperature |
-40°C ... +60°C -40°F ... +140°F |
Operating Humidity |
0 ... 100% rH |
Material of radiation shield |
PC |
Mounting material |
Aluminum tube, PC brackets, pipe clamps of W4 stainless stelle |
Material of sensor body |
Tecapet |
Protection class |
IP65 |
Dimensions |
L x W x H 450 x 100 x 170mm L x W x H 17.72 x 3.94 x 6.69 in.
|
Weight |
600g / 1.3 lb.
|
Cable and Connector |
3m cable with male 7-pin M9 Binder |
Mounting |
mast mounting brackets for 40mm pole, with 2 pipe clamps 32-50mm |
Relative Humidity |
Measuring Range |
0 - 100%rH |
Accuracy at +20°C |
|
from 0 - 90% rH from 90% - max. rH |
+ 2% rH + 3% rH |
Temperature dependence |
+ 0.03% rH /°C |
Long-term Stability |
<1% rH per year |
Output Signal |
0 ... 2.5 V |
Sensor Element |
capacitance, with protective coating (HC01)
|
|
|
Temperature |
|
Measuring range |
-40°C ... +60°C -40°F ... +140°F |
Accuracy at +20°C |
+ 0,2°C |
Output signal |
0 ... 2.5V DC |
Sensor element |
pt1000 DIN A |
Resolution in mm |
0.2 |
Orifice in cm² |
200 |
Measuring device |
Double Tipping buckets |
Capacity/Minute @ Accuracy |
up to 1mm (0.4") @ + 2% 1 - 2 mm (0.4 ...0.8") @ + 5%
|
Output signal |
one pulse per tip |
Reed switch |
potential free reed switch, fully sealed, made by Meder, Germany, >1 million operations |
Weight |
0.5 kg / 1.1 lb. |
Material |
anodized aluminum |
Cable |
PUR, shielded, 1m / 3.3ft |
Connector |
7-pin Binder M9 male |
Operating temperature |
freezing point to +75°C (+167°F) |
Heating |
not available |
Pressure range (FS) |
500 to 1500mbar |
Sensing element: |
piezoresistive pressure element |
Accuracy: |
0.1% FS |
Operating temperature: |
-40°C ... +100°C / -40°F ... +212°F |
Compensated Temperature range: |
0°C ... +80°C / 32°F ... +176°F |
Supply Voltage: |
3.5V ... 12V DC |
Output Signal: |
0.1V ... 2.5V |
Material: |
Case: Polycarbonate Sensor: Stainless Steel 316L (DIN 1.4435) |
Dimensions L x B x H: including mounting bracket, goretex vent and gland nut |
150 x 80 x 75mm / 5.9 x 3.15 x 2.95 in.
|
Weight: |
330 grams (sensor only) / 0.73 lb.
|
Protection: |
IP67 |
Cable & Connector: |
7-pin Binder jack with 2m cable |
|
CMP-3 |
SP-Lite |
Sensitivity |
5-20µV/Wm² |
100 µV/Wm² |
Spectral Range |
310 - 2800nm |
400 - 1100nm |
Max. Irradiance |
2000 W/m² |
2000 W/m² |
T.C. of Sensitivity |
+/-5% (-10°C - 40°C) |
+/- 0.15% /°C |
Operating Temperature |
-40°C - 80°C -40°F - 176°F |
-30°C - 70°C -22°F - 158°F |
Non-stability (change/year) |
+/-1% |
n.a.
|
Non-linearity (0-1000 W/m²) |
+/- 2.5% |
n.a. |
Tilt response (at 1000 W/m²) |
+/- 3% |
n.a. |
|
EasyAG |
EasyAG TriSCAN |
Measuring range |
0-100% Vol |
0-100% Vol |
Method |
HF Capacitance |
HF Capacitance |
Salinity |
--- |
0-17 dS/m |
Accuracy |
+/- 0,06% Vol |
+/- 5% (Salinity) |
Interface |
SDI-12 |
SDI-12 |
Lengths |
50cm |
50cm |
Number of Sensors |
5
|
5 |
Wind Speed
|
Measuring Range |
0.7 – 55.6m/s (2.2 – 200km/h) |
Linearity |
± 0.3m/s & ± 2% rdg @ 20°C |
Onset Speed |
0.6m/s (2.2 km/h) |
Operating Temperature |
-30°C to +65°C |
Wind Direction
|
Measuring Range |
0° - 360° |
Measuring Device |
Potentiometer |
Linearity |
± 1% |
Dead Angle |
3° ± 1° |
Switching Point |
North |
Onset Speed |
0.6m/s (2.2 km/h) |
Connector |
7 pin Binder jack (male) |
Cable |
2m |
Measuring Range |
0 - 9 Units |
Measuring Principle |
Electrical Conductivity |
Operating Temp. |
0°C-+60° |
Connector |
Binder 7-Pin M9 IP67 |
Output Signal |
0 - 2,5V |
Pressure Ranges |
1, 3, 10 bar |
Overpressure |
3, 7, 20 bar |
Type of reading |
relative, compensated against barometric pressure |
Operating temperature |
-40°C ... +80°C |
Pressure transmitter |
piezo resistive |
Compensated Range |
0°C ... +80°C |
Accuracy (0-40°C) |
0,1% FS |
Resolution |
< 0,01% FS |
Long Term Stability typ. |
Range < 2 bar: 1mbar Range > 2 bar: 0,1% FS |
Output Signal
|
0.1 ... 2.5V DC |
Supply Voltage |
3.2 ... 12V DC |
Length |
95mm / 3.74" |
Diameter |
22mm / 0.9" |
Cable |
Polyethylene (PE), vented |
Cable length |
15m (others upon request) |
Connector |
7-pin M9 Binder jack (male) |
IP Protection |
IP68 (Probe), IP67 (Connector) |
Material in Contact with Media |
Stainless Steel 316L (DIN 1.4435) / Viton / PE |
Pressure ranges |
10 and 30 bar |
Overpressure |
20 and 60 bar respectively |
Operating temperature |
-40 °C to +80°C |
Pressure Transmitter |
piezo resistive |
Compensated T-Range |
0°C to +50°C |
Accuracy (0-50°C) |
typ. 1% FS max. 1.5% FS |
Linearity |
typ. 0,25 % FS max. 0,5 % FS |
Manometer thread |
G 1/4" (NPT adapters optional) |
Output Signal
|
0.1 - 2.5V |
Supply Voltage |
3.5V - 12V DC |
Length |
49 mm (1.93") |
Diameter |
22mm (0.87") |
Weight |
30 gr. |
Cable |
shielded PVC2 |
Cable Length |
5 or 10m (please order separately) |
Connector on probe Connectors on cable |
4-pin M12 male on probe 4-pin M12 female to 7-pin M9 Binder male
|
IP Protection |
IP67 |
Material in Contact with Media |
Stainless Steel 316L (DIN 1.4435) / Viton / PE |
Dimensions |
350 x 100 x 100 mm |
Weight |
500g |
Protection Class |
IP-65 |
Power Supply |
5.6 to 16V DC |
Temperature Range |
Compass: -20°C ... +70°C GPS: -40°C ... +75°C |
Interface |
SDI-12 |
Compass |
|
Accuracy |
2° |
Resolution |
0.01° |
Magnetometer Specifications |
+ 1100uT Measurement Range 0,015uT Resolution |
Max Sample Rate |
10 per second |
|
|
GPS Locator |
Receiver Type |
32 Channel Acquisition |
Positional Accuracy |
1.3m (outdoor), 50% CEP |
Sensitivity |
-161dBm Tracking -161dBm Hot Acquisition -145dBm Cold Acquisition |
TTFF (Time To First Fix ) |
< 1sec @ -130dBm outdoors HOT 33sec typ. @ -130dBm COLD |
Operational Limits: |
Max. velocity: 515m/s |
Power Consumption: |
60mA in acquisition phase |